COMING SOON
See How Much Improvement There Is With Our //M+ Flash
SIMULATED ACCELERATION TESTING
This test was performed on our Mustang Dyno. Because Mustang Dyno’s simulate load and wind resistance, we can get a pretty good idea of how the bike will perform, while in a controlled environment without breaking any speed laws. All tests were performed back to back with same starting gear, dyno settings and load to ensure accuracy. Do not take these numbers as an absolute for your own acceleration times. There are innumerable variables that may cause your times to be faster or slower than what we tested. This test is purely to display the difference between stock and flashed to show improvements.
The first test is simulated 60-130mph WITH the stock restrictions. You can see the time is takes to go from 60-130mph is 4.36 seconds.
With our //M+ flash removing the restrictions, you can see a HUGE improvement from 60-130mph. The S1000RR goes from 4.36 seconds to 3.82 seconds!! That’s almost half a second improvement from just removing restrictions!
We went a step further and performed another test at a lower RPM to really show how heavy the restrictions are. This test is 40-120mph. Starting at a lower RPM really let’s us see how bad the low and mid-range is with the stock restrictions. This test is WITHOUT our flash. We managed to get a 5.42 second 40-120mph.
WITH our //M+ flash the 40-120mph time went from 5.42 to 4.32 seconds!! That’s almost a full second difference! It’s clear our //M+ flash yields HUGE improvements over the stock (restricted) software.
SATISFIED CLIENTS MAKE US HAPPY
