Product Description
***A GREAT ADDITION TO YOUR RACE BIKE WITH BRENTUNING MOTO FLASH.
YOU’RE ABLE TO LOG AND SEND LOGS TO US SO WE CAN ADJUST THE
TUNE SPECIFICALLY FOR YOUR BIKE. THIS IS THE BEST WAY TO SQUEEZE
EVERY BIT OF HORSEPOWER OUT OF YOUR BIKE WITHOUT VISITING
OUR SHOP DIRECTLY.***
AEM’s Wideband Failsafe Gauge provides the ability to accurately tune AFR, while actively protecting your engine by constantly monitoring AFR curves and activating a user-defined failsafe strategy if it runs lean.
The Wideband Failsafe Gauge is a Universal Exhaust Gas Oxygen (UEGO—“you-way-go”) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband FAILSAFE Gauge triggers a user defined output function that can save an engine from catastrophic damage.
This gauge is a must have for all tuned performance engines, either forced induction or naturally aspirated, fuel injected or carbureted. Any high performance vehicle owners who want a highly accurate AFR tuning tool with logging and a protection strategy that can save an engine from catastrophic failure will want this Failsafe device.
Features
Since the Wideband Failsafe Gauge is a wideband AFR controller with an internal boost sensor (up to 29 PSIg), it is able to display AFR and either boost or vacuum in real time on a vibrant Organic LED screen. It also includes an on board data logger that records AFR, RPM and boost/vacuum and can be downloaded and viewed in AEMdata analysis software. The gauge includes a low side output for triggering a failsafe strategy in the event AFR falls outside of the operating window, and an RPM input to log RPM for tuning purposes.
The gauge’s failsafe strategy is completely user definable, from something as simple as making the gauge flash to using the ground output to trigger a check engine light, to cut boost, retard timing, or even switch to a safety map using a standalone engine management system.
The Wideband Failsafe Gauge’s software simplifies the interface set up. Choose displayed parameters (AFR, boost or vacuum) on the center OLED screen and bar graph, set the alarm flash mode and adjust the gauge’s lighting for a custom look, then install the correct faceplate to match your configuration (6 faceplates to choose from).
Bosch Wideband UEGO sensor and weld-in bung included:
-On-Board 3+ hour Datalogging capability at 20hz per parameter
-Intuitive set up software (PC based with USB connectivity)
-Interchangeable faceplates and bezels
-No free air calibration required—ever
-Data analysis using AEMdata software
-AEMnet compatible
-Standard 52mm gauge size
Capacity
After the engine is tuned and a safe operating window of AFR is established, the Wideband FAILSAFE Gauge continually monitors AFR and boost or vacuum to make sure that AFR does not fall out of the defined operating window at a given boost or vacuum level. If the Wideband Failsafe detects an out of range AFR reading, the gauge triggers a low side output (ground signal with a 1.5 amp draw max) that can save your engine from catastrophic damage (see example strategies, below).
Use the gauge’s intuitive software to configure the low side output, create a user-adjustable time delay strategy to prevent false alarms, and customize the gauge lighting to flash and alert the driver if an alarm is triggered.
Use the Wideband Failsafe gauge’s intuitive software to establish a safe AFR operating window, configure the low side output to trigger a failsafe strategy and set a time delay strategy to prevent false alarms
The Wideband Failsafe Gauge contains an on-board data logger for logging over three hours of data recording (20 Hz per parameter) of AFR, RPM, boost, alarm, and others. Data logs can be downloaded for viewing in AEMdata software.
Additionally, the Wideband Failsafe Gauge is an ideal engine tuning tool. The highly accurate Bosch AFR wideband sensor is maintenance free and never requires free-air calibration, enabling you to fine tune AFR from an AEM programmable engine management system, any other programmable EMS or piggyback programmer. For carbureted applications, it can tell you when it’s time to swap carb(s), change jets or simply modify fuel pressure.
EXAMPLE ENGINE PROTECTION STRATEGIES
NATURALLY ASPIRATED, TURBOCHARGED OR SUPERCHARGED WITH STAND ALONE EMS OR PIGGYBACK CONTROLLER: Can use the low side output to cut revs, retard timing, trigger a separate fuel or ignition map and activate an ancillary warning light. Users with turbos can also trigger the device to cut boost (may require separate solenoid). The aforementioned strategies are provided as an example. Available failsafe strategies will ultimately be dependent on the capability of the EMS or piggyback engine controller.
Specs
WIDEBAND FAILSAFE GAUGE TECHNICAL FEATURES:
-Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
-Internal boost sensor
-Bosch Wideband UEGO sensor and weld-in bung included
-On-Board 3+ hour Datalogging capability at 20hz per parameter
-Full color Organic Light Emitting Diode (OLED) Display in center, user selectable feature (boost/vacuum or AFR)
-24 three-color sweeping LEDs, user selectable feature (boost/vacuum or AFR)
-Intuitive set up software
-Dimmer input included
-Interchangeable faceplates and bezels (see options, below)
-No free air calibration required—ever
-Data analysis using AEMdata software
WIDEBAND FAILSAFE GAUGE INSTALLATION FEATURES:
-AEMnet compatible (CAN 2.0)
-Differential AFR analog output
-Differential boost analog output
-Configurable RPM input for logging
-One low-side driver output (Ground with 1.5 amp max draw)
-Positive-lock connectors
-Tunable PC-based software with USB connectivity
-Time based reset for outputs
WIDEBAND FAILSAFE GAUGE FACEPLATE STYLES:
-Kit comes with 6 different faceplates and black and silver bezels.
-Black Vacuum only in sweeping LEDs
-Black and White AFR in sweeping LEDs
-Black and White Vacuum/Boost in sweeping LEDs
-Black Lambda in sweeping LEDs
Reviews
There are no reviews yet.